Specs

Segway Drift W1

General

Dimensions
Unit: 12.5×10.6×8.7 in (318×269×219 mm)
Payload: 22-220 lbs (10-100 kg)
Weight
Net (single wheel): Approx. 7.7 lbs (3.5 kg)

Rider

Recommended Age
6+ years old. See the weight limit

Machine Parameters

Max. Speed
Approx. 7.5 mph (12 km/h)
Top speed will vary based on riding style and remaining battery life. Top speed will be reduced when the battery is low.
Typical Riding Time
45 minutes
Max. Slope
10°
Traversable Terrain
Flat, hard ground free of bumps or obstacles
Operating Temperature
14-104°F (-10-40°C)
Storage Temperature
-4-122°F (-20-50°C)
IP Rating
Mainframe IP54/ Battery pack IPX6
Max. Storage Time
Approx. 180 days/100% power; Approx. 30 days/30% power
Charge Time (for both mainframes)
Approx. 3 hours
Nominal Voltage
22.2 VDC
Max. Charging Voltage
25.2 VDC
Charging Temperature
32-104°F (0-40°C)

Battery

Nominal Capacity
44.4 Wh
Battery Management System
Over-voltage, under-voltage, over-current, short circuit, and over-heating protection. Auto-sleep, auto-balance, and auto-wake.

Motor

Max. torque (single wheel)
6 Nm
Output Power
37.5 W

Charger

Input Voltage
100-240 VAC
Output Voltage
25 ± 0.2 VDC
Output Current
1.5A

Download

Segway Drift W1

Manuals and Guides

User Manual
Warranty

Videos

Segway Drift W1

FAQ

Segway Drift W1

Troubleshooting

Re-Calibration

There is a very simple recalibration procedure that will reset your e-Skate.

Power off
Set the e-Skate upside down on a level surface

Power on
The unit will beep and the wheel will begin turning slowly in alternating directions

Power off
Set the e-Skate right side up

Power on
The e-Skate should be recalibrated and function properly

You may need to repeat this procedure multiple times to get a full calibration